=== Limiters ===

34 Limiter/detectors, F =0.1-20 GHz, limiting levels =-5+10 dBm, limiting types: hard, soft
155 Limiters, RF, precision, F =1-3000 MHz, Imp =50/75 Ohm, P <1.5 W (BNC(m) to BNC(f), N(m) to N(f)
313 Limiters, high performance, F =5-1500, 50-1500, 500-2400 MHz, IL =2.5-2.7 dB, maximum limiting Pout at +20 dBm, Pin =+2+2.2 dBm (20 V), +1 dBm (15 V), -1 dBm (10 V), Imp =50 Ohm (TO-8, SMA, SMP), -55+85C
451 Limiters, passive, requiring no external bias, L-, S-, C-, X-, Ku, Ka-bands, BW =3-13%, P(peak) =0.3-40.0 kW, P(mean) =0.01-4.0 kW, spike leakage =2-10 nJ, flat leakage =30-100 mW, VSWR =1.2-1.4, IL =0.4-1.1 dB, T(recovery) =0.4-5.0 ms
602 Limiters, PIN diode, F =0.5-18.0 GHz, IL =0.4 -2.0 dB, VSWR =1.3-2.0, Lim threshold =+6 or +9 dBm, Pin <1 W (CW), -55+125C
958 Limiters, PIN diode, F =1.0-2.0, 2.0-8.0, 2.0-18.0, 8.0-18.0 GHz, VSWR =1.5-2.0, IL =0.5-1.8 dB, leakage =20 dB, -55+85C
1316 Limiters, constant phase, F =10-200 MHz, linear BW =2-40 MHz, DynR(in) =-700 dBm, PhSR =10 (over DynR), -55+100C
1539 Limiters, coax, SMA, F =0.1-10.0, 9.0-16.2 GHz, IL =1.6-1.8 dB, Pin =5-10 W, T(recovery) =1000 ns, -45+85C
1689 Limiter set, constant transmission phase, F(center) =160 MHz, operating BW =30 MHz, DynR =0 to -65 dBm, Pout =102 dBm, Var Ph =5, phase tracking vs DynR =5, VSWR =1.5, supply V =-15 VDC@I =175 mA, -54+85C
2042 Limiter modules, broadband, PIN diode, F =0.5-4.0, 2-8, 4-12, 2-18 GHz, IL <0.8-2.2 dB, VSWR <1.5-2.0, P=3-5 W (CW), 0.6-1.0 kW (peak), flat leakage <0.2 W
2044 Limiters, coaxial, broadband, PIN diode, F =0.01-0.1, 0.1-0.5, 0.5-4.0, 2-8, 4-12, 2-18 GHz, IL <0.7-2.5 dB, VSWR <1.5-2.0, P =1-5 W (CW), 0.1-1.0 kW (peak), flat leakage <0.2 W
2296 Limiters, GaAs MMIC, F =1-12 GHz, Iso =4 dB, P1dB =+2 dBm, Max limit =+3 dBm, -55+125C
3157 Signal limiters, F =50-4000 MHz, IL =2.0-3.5 dB, limiting level =+2.0+7.5 dBm@20 V, 0+6.5 dBm@15 V, -2.0+2.5 dBm@10 V, VSWR =2.0-2.3, bias V =5-20 V (TO-8, SMTO-8)
3301 Limiter, PIN, for LNA RF overload protection, F =DC-12 GHz, BW =10% F, IL =0.3-0.7 dB, Ph match =2, Iso >20 dB, VSWR =1.25, T(response) =5 ns, Pin =2 W, -55 to +65C, altitude =50000 feet, shock =100 G (8 ms, 1/2 sinewave), Vibr =5-2000 Hz, 10 G
3519 Limiter, constant phase, miniature, F(center) =160 MHz, operating BW =40 MHz, DynR =+5 to -65 dBm, Pout =+10 dBm, Var Ph over DynR =5, VSWR =1.5-2.0, Harm <-10 dBc, supply V =+5/-5 VDC@I =50/125 mA, -54 to +85C
3703 Limiters, PIN diode, microwave, hermetic modules, fast recovery time, F =0.1-0.5, 0.5-1.0, 0.5-2.0, 1.0-4.0, 2.0-4.0, 2.0-8.0, 2.5-5.0, 4.0-8.0, 5.0-10.0, 6.0-18.0, 7.0-11.0, 8.0-12.0, 8.0-16.0, 8.0-18.0, 12.0-18.0, 0.5-18.0, 1.0-18.0, 2.0-18.0 GHz, IL <0.5-2.8 dB, VSWR <1.5-3.5, leakage P =+18+20 dBm, P =1-2 W (CW), 100-70 (peak), -65 to +125C (SMA male, SMA female, cylindrical module)
3704 Limiters, Schottky, microwave, compact size, hermetic package, F =0.1-0.5, 0.1-1.0, 0.5-2.0, 1.0-2.0, 1.0-4.0, 2.0-4.0, 2.0-8.0, 2.5-5.0, 4.0-8.0, 4.0-18.0, 5.0-10.0, 7.0-11.0, 8.0-12.0, 8.0-16.0, 8.0-18.0, 12.0-18.0 GHz, IL <0.5-2.5, VSWR <1.35-2.00, P <10-3 W (CW), 500-200 W (peak), -65 to +125C
3725 Limiters, broadband, coaxial, L-, S-band, BW =200 MHz, P(peak) =0.25-2.0 kW, P(mean) =25-140 W, VSWR =1.3-1.4, IL =0.3-0.4, spike leakage =50-1000 mW, flat leakage =30-50 mW, T(recovery) =0.5-0.6 us
3727 Limiters, marine (15 models), F =3.02-3.08, 3.03-3.07, 9.30-9.425, 9.32-9.43, 9.3-9.5, 9.36-9.46 GHz, P(peak) =1.5-30 kW, total leakage =25-100 mW, VSWR =1.22-1.50, IL =0.5-1.0 dB, T(recovery) =1-2 us, length =55-35 mm
4013 Limiters, PIN-diode, broadband, coaxial and drop-in modules, F =2-18 GHz, IL <1.0-2.7 dB, flat leakage =130-150 mW, VSWR <1.7-2.0, P =150-500 W, T(recovery) =100-200 ns
4014 Limiters, PIN-diode, high power, coaxial and drop-in modules, F =1-2, 1.2-1.4 GHz, IL <0.6-0.75 dB, flat leakage =0.1 W, VSWR <1.3-1.5, P =40-60 W
4047 Limiters, RF. These RF limiters protect against damage from DC voltage (up to 50 VDC), AC voltage (up to 100 VAC), RF power (up to 1.5 W), F =1-1000, 1-3000 MHz, Imp =50/75 Ohm, VSWR =1.25 (BNC, N)
4210 Limiters, broadband, plug-in, F =0.1-150.0, 100-900, 0.01-1.0 MHz, Pin <+15+20 dBm, Pout =-5.0-0.5 dBm
4466 Limiters, reflective, broadband, high power, F =0.5-2.0, 2-4, 2-12, 4-8, 8-12, 8-18, 12-18 GHz, P1dB =+7+10 dBm, P =1-3 W (CW), 100-1000 W(peak), IL <0.5-2.6 dB, leakage P <5-100 mW (CW), <55-200 mW(peak), -55 to +125C
4469 Limiters, voltage controlled, F =1-1500, 30-1500 MHz, VSWR <2, IL <3.5 dB, Pin <+25 dBm, limiting Pout =-10+0.3 dBm@V(control) =5-20 V, -40 to +100C
4665 Limiter, low current consumption, F =0.1-32.0 MHz, IL <0.35 dBm, leakage <+27 dBm, VSWR <1.4, Imp =50 Ohm, IP2 >+86 dBm, IP3 >+49 dBm, P1dB =+20 dBm, -55 to +85C
5617 Limiters, voltage controlled, thin film, 2 models, F =50-1000 MHz, Pin =0+20 dBm, Psat. out =-5+2 dBm, IL =3.7 dB, T(recovery) <50 ns, operating bias =+5 to +20 VDC (TO-8U, SM-45)
5814 Limiter, GaAs MMIC, F =1.0-12.0 GHz, IL =4 dB, P1dB =+2 dBm, output limiting level =+3 dBm, VSWR =1.4, I =9 mA (DIE)
6047 Limiters, PIN diode, standard modules hermetically sealed for stripline or microstrip applications, 4 models, F =1-2, 2-8, 2-18, 8-18 GHz, VSWR <1.5-2.0, IL <0.5-1.8, leakage <+20 dBm, T(recovery) <100 ns, -55 to +125C
6048 Limiters, PIN diode, standard coaxial packages internal moduls are hermetically sealed, 4 models, F =1-2, 2-8, 2-18, 8-18 GHz, VSWR <1.5-2.0, IL <0.5-1.8, leakage <+20 dBm, T(recovery) <100 ns, -55 to +125C
6235 Limiters, passive broadband, low insertion loss, hermetically sealed module, moderate cost, for power levelling and receiver protection. In ECM, radar and communication systems, these limiters can protect transistor, tunnel diode or FET amplifiers, detectors and mixers, 10 models, F =0.5-1, 0.5-2, 1-2, 2-4, 2-8, 2-18, 4-8, 7-12, 8-16, 11-18 GHz, IL <0.5-2.2 dB, VSWR <1.4-2.2 Pin =1 W(CW), 100 W(peak@1us), T(recovery) =10-20 ns, limiting threshold =+6 dBm, leakage level =+13 dBm, -55 to +125C
6237 Limiters, detecter activated, broadband, low insertion loss, hermetically sealed module, moderate cost, for power levelling and receiver protection. In ECM, radar and communication systems, these limiters can protect transistor, tunnel diode or FET amplifiers, detectors and mixers, 10 models, F =0.5-1, 0.5-2, 1-2, 2-4, 2-8, 2-18, 4-8, 7-12, 8-16, 11-18 GHz, IL <0.7-2.5 dB, VSWR <1.4-2.5, Pin =1 W(CW), 100 W(peak@1us), T(recovery) =10-20 ns, limiting threshold =+6 dBm, leakage level =+13 dBm, -55 to +125C
6496 Limiter/detectors, F =0.1-20.0 GHz, limiting levels =-5+10 dBm, limiting types: harb, soft
6517 Limiter (hard diode limiter), high speed, high power, low insertion loss, self biased, internal DC blocks, ultra broad bandwidths, surface mountable with removable RF connectors, F =0.5-18 GHz (option 0518), 2-18 GHz (option 218), 6-18 GHz (option 618), 0.5-2 GHz (option 052), 0.2-2 GHz (option 022, speed <50 ns), limited threshold <+10 dBm, P <1 W (CW), <200 W (peak), IL <2 dB, VSWR <2, leakage <+14 dBm@-20 dBm input, size =0.5x0.5x0.22&1.0x1.0x0.4, -55 to +85C
8045 Limiters, signal, TO-8 & SM package, SMA connectorized, 3 models, F=5-3000, 50-4000, 100-2000 MHz, IL=4.0-0.3 dB, limiting level=2.5-10.0 dB, VSWR (I/O)=2.0-2.1/2.0-2.5, supply voltage =15 V @ I=7 mA.
13999 Limiter, avialable in T0-8, SMA, and surface mount packages, F =5-3000 MHz, IL =0.6 dB, maximum limiting output level (@+20 dBm input) =+15 dBm, VSWR(I/O) =1.5/1.7, -55 to+85C
16929 Limiter, PIN, male-female RF connector options, F = X-band (5%), IL = 0.8 dB, VSWR = 1.5, flat leakage < +10 dBm, P (RF) = 2 W (CW), 10 W (peak), T (recovery) = 2 us, -40 to +85C, size = 0.50" x 0.25" x 0.15".
18800 Limiters, PIN diode, active, low limiting threshold (+6 dBm typical), low leakage level (+13 dBm typical), 1 WCW & 200 W peak (1 mks) power handling capability, built-in block, both ends, typical recovery time is less than 10 mks, hermetically sealed module. F =0.5-1.0, 0.5-2.0, 1-2, 2-4, 2-8, 0.5-18.0, 1-18, 2-18, 4-8, 7-12, 8-16, 8-18, 11-18 GHz, IL <0.5-2.0 dB, VSWR <1.4-2.0, Lim threshold =+6 dBm, leakage @ 1 WCW input =+14+13 dBm, -55 to +125C
18801 Limiters, PIN diode, passive, low insertion loss, fast response & short recovery time (10 to 20 ns typical), 1 WCW and 100 W peak (1 mks) power handling capability, built-in DC return, hermetically sealed module, moderate cost. F = 0.5-1.0, 0.5-2.0, 1-2, 2-4, 2-8, 0.5-18.0, 1.0-18.0, 2-18, 4-8, 7-12, 8-16, 8-18, 11-18 GHz, IL <0.4-1.8 dB, VSWR <1.3-2.0, Lim threshold =+9 dBm, leakage @ 1 WCW input =+20+19 dBm, -55 to +125C
20739 Limiters, PIN diode, detector activated type, low limiting threshold (+6 dBm), low leakage level (+13 dBm), 1 W CW & 200 W peak (1 us) power handling capability, built-in block, both ends, hermetically sealed module, typical recovery time is less than 10 us. F=0.5-1.0, 0.5-2.0, 1-2, 2-4, 2-8, 0.5-18.0, 1-18, 2-18, 4-8, 7-12, 8-16, 8-18, 11-18 GHz, IL<0.5-2.0 dB, VSWR<1.4-2.0, Lim threshold=+6 dBm, leakage@1 W CW input=+14+13 dBm, -55 to +125C
20740 Limiters, PIN diode, passive, low insertion loss, 1 W CW and 100 W peak (1 us) power handling capability, fast response & short recovery tinee (10 to 200 ns typical), built-in DC return, hermetically sealed module, moderate cost. F=0.5-1.0, 0.5-2.0, 1-2, 2-4, 2-8, 0.5-18.0, 1-18, 2-18, 4-8, 7-12, 8-16, 8-18, 11-18 GHz, IL<0.4-1.8 dB, VSWR<1.3-2.0, Lim threshold=+9 dBm, leakage@1 W CW input=+10+19 dBm, -55 to +125C
21174 PIN limiter, F = 0.5-18.0 GHz (X-band 5%), IL = 0.8 dB, VSWR = 1.5, flat leakage < +10 dBm, P (RF) < 2 W (CW), 10 W @ (peak, 1 us), T (recovery) = 2 us, -40 to +85?C, size = 0.50 x 0.25 x 0.15
22031 Limiters, PIN diode, low insertion loss , low package power circuit protection, high CW power handling, 8 models. F =2-18, 0.5-1.0, 1-2, 2-4, 4-8, 8-12, 12-18 GHz, P =2 W (CW), 100 W (peak), leakage <20 dBm (peak), <17 dBm (CW), IL =2.2-0.4 dB
22405 Limiters, passive, W/G, 23 models, F=3020-3080, 3030-3070, 8800-9000, 9100-9300, 9300-9500, 9300-9420, 9320-9430, 9360-9460, 9690-9790, 9380-9570 MHz, P(peak)=10-70 kW, total leakage=50-100 mW, RL=14-20 dB, IL=0.5-1.8 dB, recovery period to 73 dB=1.0-1.3 ms, S.T.C. attenuation=30 dB, length=27-74 mm
22876 Limiter, constant phase, miniature, F(center)=160 MHz, BW=40 MHz, DR=+5-65 dBm, Pout>+10 dBm, Ph variation<5 deg over dynamic range, VSWR(I/O)<1.5/2.0, Harm<-10 dBc, supply voltage=+5 V@I<50 mA, -5 V@I<125 mA, size=1.50''x1.00''x0.275''
22877 Limiter, constant transmission phase, F(center)=160 MHz, BW=30 MHz, DR=0-65 dBm, Pout=+102 dBm, Ph variation<3 deg (over dynamic range), <5 deg (total), Ph tracking vs dynamic range<3 deg@+25C, <5 deg over T, VSWR(I/O)<1.5, supply voltage=-15 VDC@I<175 mA, size=2.50''x1.38''x0.265''


  
Back


© 2001 - 2016 
    ChipFind:       ,
  ,